GE Healthcare - Marquette MAC 1200
by GE Healthcare
- Videos
- News
T-2 MAC 1200/1200 ST Revision C 2012250-021 21 July 2004 The information in this manual only applies to MAC 1200/1200 ST software version 6. It does not apply to earlier software versions. Due to continuing product innovation, specifications in this manual are subject to change without notice. The information in this manual only applies to MACTM 1200 resting ECG analysis system with the 2018357-003 or 2013503-003 board and software v6.2. It does not apply to earlier software versions. This manual supplies technical information for service representative and technical personnel so they can maintain the equipment to the assembly level.
DESCRIPTION The MAC 1200 Resting ECG System offers a comprehensive solution.The MAC 1200 is a compact 12-lead electrocardiograph designed for acquisition - with or without analysis. The system can be configured as a basic electrocardiograph without analysis for facilities with minimal ECG requirements. The system can also be configured to incorporate the proven 12SLTM ECG analysis program.
Adding the 12SL program creates an electrocardiograph with the industry leading interpretation program and measurements. If your facility only requires measurements, we offer a version with 12SL measurements only.
3Replies3 months ago | 3 months agoTime and Date issue The coin cell is at 3.25 VDC. The hardware test states that system memory and static memory both errored out. Is this a coin cell issue or the main board? Any assistance would be greatly appreciated.Reply |
| -SKMR 7 months ago | 7 months agonot printing in auto mode i can not print in auto mode . what i could be the problem ? Reply |
1Reply9 months ago | 9 months agoFlashing LCD Upon Startup When I have the unit plugged in to a AC, the green standby light is on and when I press the 'on/ stdby' button the green LED by 'start' and yellow LED by 'battery low' and 'stop' will flash intermittently.I have tried a new main battery in the unit and that does not help.The power output from the power supply to the PCB is 25.8 DCV. Would not having the called for 26.5 DCV cause this issue or is that close enough to the called for output?Reply |
FEATURES
- Waveform display
- Full-size paper reports
- Measurements, interpretation and memory available in any combination
- Simultaneous 12-lead ECG acquisition and analysis
- 12SLTM Interpretation program
- Battery powered
- 3-year warranty
- Easy to use
- Compact, lightweight design with carrying handle
- Field upgradability
SPECIFICATIONS
| EKG/ECG Type | Rest |
| Weight | 12.3 lbs |
Additional Specifications
GE Healthcare - Marquette MAC 1200
by GE Healthcare
- Videos
- News
The MAC 1200 is a compact 12-lead electrocardiograph designed for acquisition - with or without analysis. The system can be configured as a basic electrocardiograph without analysis for facilities with minimal ECG requirements. The system can also be configured to incorporate the proven 12SLTM ECG analysis program.
Adding the 12SL program creates an electrocardiograph with the industry leading interpretation program and measurements. If your facility only requires measurements, we offer a version with 12SL measurements only.
3Replies3 months ago | 3 months agoTime and Date issue The coin cell is at 3.25 VDC. The hardware test states that system memory and static memory both errored out. Is this a coin cell issue or the main board? Any assistance would be greatly appreciated.Reply |
| -SKMR 7 months ago | 7 months agonot printing in auto mode i can not print in auto mode . what i could be the problem ? Reply |
1Reply9 months ago | 9 months agoFlashing LCD Upon Startup When I have the unit plugged in to a AC, the green standby light is on and when I press the 'on/ stdby' button the green LED by 'start' and yellow LED by 'battery low' and 'stop' will flash intermittently.I have tried a new main battery in the unit and that does not help.The power output from the power supply to the PCB is 25.8 DCV. Would not having the called for 26.5 DCV cause this issue or is that close enough to the called for output?Reply |
FEATURES
- Waveform display
- Full-size paper reports
- Measurements, interpretation and memory available in any combination
- Simultaneous 12-lead ECG acquisition and analysis
- 12SLTM Interpretation program
- Battery powered
- 3-year warranty
- Easy to use
- Compact, lightweight design with carrying handle
- Field upgradability
SPECIFICATIONS
| EKG/ECG Type | Rest |
| Weight | 12.3 lbs |
3Replies3 months ago | 3 months agoTime and Date issue The coin cell is at 3.25 VDC. The hardware test states that system memory and static memory both errored out. Is this a coin cell issue or the main board? Any assistance would be greatly appreciated.Reply |
| -SKMR 7 months ago | 7 months agonot printing in auto mode i can not print in auto mode . what i could be the problem ? Reply |
1Reply9 months ago | 9 months agoFlashing LCD Upon Startup When I have the unit plugged in to a AC, the green standby light is on and when I press the 'on/ stdby' button the green LED by 'start' and yellow LED by 'battery low' and 'stop' will flash intermittently.I have tried a new main battery in the unit and that does not help.The power output from the power supply to the PCB is 25.8 DCV. Would not having the called for 26.5 DCV cause this issue or is that close enough to the called for output?Reply |
FEATURES
- Waveform display
- Full-size paper reports
- Measurements, interpretation and memory available in any combination
- Simultaneous 12-lead ECG acquisition and analysis
- 12SLTM Interpretation program
- Battery powered
- 3-year warranty
- Easy to use
- Compact, lightweight design with carrying handle
- Field upgradability
SPECIFICATIONS
| EKG/ECG Type | Rest |
| Weight | 12.3 lbs |
How To Change Print Roller On Ge Mac 1200 Ecg Machine Manual Download
Additional Specifications
